4E0905852 Cayenne VW Touareg Audi A8 ELV Steering Column Lock Module Repair Kit

Description

The Access Start Authorization lock module is a part of vehicle's steering column.  Module failure is a common problem in
Cayenne 2003-2010
model vehicles. Also in
Touareg and Audi A8
.
The problem is typically identified by no start and no response from key in the ignition, or proximity access (Start button). The Start / Stop Authorization Module (along with the Electronic Ignition Switch) is responsible for key/transponder recognition, unlocking/locking of steering wheel and powering up all modules in the vehicle. If there is an issue with any of the lock module components (actuator motor, sensing micro switches, relay) or the integrated Immobilizer system Microprocessor/PCB, the module will not provide power to
Terminal 15
(ignition on).
End result, no ignition and no engine start.  The module will typically store "
00288 - Steering Column Lock Actuator  Defective
" or similar fault. This repair kit is for module number
4E0905852
You will get OEM replacement parts.
Repair Kit for modules 4E0905852
KIT includes
2 x Tyco relays Automotive grade
Common problem with this module :
-Takes several attempts before car will start
-Steering lock fault code 00288 (steering lock actuator N360)
-Clicking noise when key inserted
-No ignition car will not start
-Vehicle immobilized
-Steering wheel locked
Anyone with basic knowledge and tools can desolder old and solder new parts.
If the module if from your car then
NO ADAPTATION is required. Just put it back in when you change the parts.
If you have a situation where you don't have ignition at all caused by this module then there is a way to reset it.
What ever problem you have with this module don't put it back in as it was, because the problem will reoccur unless you change the switches and relay.
*This kit will not solve the problem if the motor itself is damaged. You can check the motor easily with 12VDC supply. It happens rarely but it’s better to check.